CANTEK

TF-900S Radial Drilling Machine

Machine Information

Features
Capacity:   Metric  Inch
Drilling Steel 38mm 1 ½”
Cast iron 50mm 2”
Tapping Steel 19mm ¾”
Cast iron 25mm 1”
Boring Steel 75mm 3”
Cast iron 105mm 4 1/8”
Spindle stroke 200mm 7 ¾”
Size of Morse Taper No. 4
Spindle speed – 6 steps 88, 154, 282, 455, 796, 1500 RPM
Spindle feeds 0.05mm, 0.09mm, 0.15mm
(0.002”) (0.0035”) (0.006”)
Column diameter 210mm 8 ¼”
Max. distance column surface to spindle centre 760mm 29-7/8”
Min. distance column surface to spindle centre 215mm 8-7/16”
Horizontal travel of headstock 545mm 21-7/16”
Max. distance base to spindle 1110mm 43 ¾”
Min. distance base to spindle 282mm 11-3/32”
Vertical travel of arm 635mm 25”
Overall height of column 1850mm 72-7/8”
Machine height from floor (max) 2175mm 85-11/16”
Dimensions of base 1300x650x150 51 3/16” x25 5/8” x 5 7/8”
Effective area of table 500x405x350 19 5/8” x 16” x 13 3/4”
Spindle drive motor 2HP
Arm elevation motor 1HP
Coolant pump 1/8HP
Electrics   230/3/60
Net weight, approx. 1150kgs (2530lbs)
Gross weight, approx. 1350kgs (2970lbs)
Measurement 1450x900x1950 57” x 35 7/16” x 76 ¾”