The MX350 from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
PLC control system with LED display and keypad
Work-piece is fed by chain
Edge coil support plate: Ø 800mm (31 1/2″), for PVC/ABS
Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
Teflon-coated hot-melt glue pot
Spring loaded pressure unit with (2) pressure rollers
Pre-milling function can remove up to 3mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels. Consist of (2) counter rotating diamond cutterheads for optimum cut results.
High frequency 12000 RPM end trimming unit, with Ø100 mm (4″) TC-Saw blades
High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
Radius scraper with 2mm radius
3000 RPM top & bottom buffing units
Heavy duty pressure beam with extendable work-piece support
Heated infeed fence for pre-heating the panel for optimum glue penetration
9 meters/min. (29.5 FPM)
8~45 mm (0.315″~1.77″)
Max. premill thickness
0.4 ~ 3 mm (0.0158″~0.118″)
Min. panel width
Min. panel length
Working table height
Dust collection outlet
Ø 127 mm (5”) x 2
7.5 KW (10HP)
40 AMPS @ 230/3/60
660 kgs (1452 lbs)
708 kgs (708 lbs)
230/3/60 (Voltage must be +/- 5%)
Pre-milling motors (2 pcs)
1.1 kW each (12000 RPM)
Glue spindle motor
Front/rear trimming motor
0.22 kW (12000 RPM)
Upper trimming motor
0.37 kW (12000 RPM)
Lower trimming motor
0.37 kW (12000 RPM)
Upper buffing motor
0.12 kW (3000 RPM)
Lower buffing motor
0.12 kW (3000 RPM)
Operating panel with LED keypad
Glue temperature settings
Units can be selected and disengaged individually
Heated fence is standard
Edge feeding for coiled materials
Edge feeding is automatic for roller materials with a thickness of 0.4–3 mm
Heavy-duty chain feeder
The steady work-piece feeding mechanism is comprised of a chain and set of drive rollers, which will not scratch the work-piece surface.
(2) counter rotating cutterheads for removing up to 1mm of the panel edge to produce an optimum edge for applying the edge tape. This is designed to clean up edges which are poorly machined.
The 1.2 kg Teflon-coated glue pot is designed for EVA hot-melt glue. The glue is applied by a roller and the glue amount is adjustable
The pressure roller unit consists of one large roller, followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring-loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. The adjustable spring system allows for a perfect bond between the panel and edge every time.
Coiled material up to 3 mm in thickness can be trimmed by the guillotine shears.
End Trimming Unit
Mounted on high-precision linear bearings, which ensure perfect cutting results for years to come. The high frequency 12000 RPM motor meets any challenge, regardless of edge type and thickness.
Flush and Radium Trimming Unit
The biggest advantage of the new multi-functional combination unit is the amount of space it saves in the machine. The adjustment of the settings from flush to beveled finish for thin edges, as well as radius trimming for thicker edges, is quick and easy. TC 2 mm radius tooling is included as standard.
Scraping Unit – Radius Scraping Unit
The scraping unit fine-tunes the edge radius while removing knife marks left on during the milling process on 2mm & 3mm edging.
The buffing unit leaves a super finish on ABS and PVC edging, and removes any discoloration on the edges, which is especially noticeable when working with dark edge material.
Panel Thickness Setting
Panel thickness adjustment is quick and accurate & is achieved by a handwheel with digital readout.
OPTIONAL PUR GLUE
Superior strength compared to conventional adhesives.
Versatile: they will bond PVC, ABS, melamine, decorative laminate, metals and most plastics
Heat resistance: above 100°C (can be above 130°C dependant upon the adhesives used)
Chemical Resistance: resistant to migratory oils, plasticisers, water, lacquers & solvents
Low application temperatures: usually 120°C (standard hot-melts are applied 160-200°C)
Cost-Effective: although traditionally viewed as expensive, the high performance and ease of use
combine to make them extremely affordable
PUR hot melt adhesives offer exceptionally high bond strength and unbeatable heat and