Used Italpresse XL/4-S 25-13 PF Hydraulic Cold Press

Machine Information


  • Platen dimensions 2500x1300mm (98’’x 51’’)
  • Platens: 2
  • Openings: 1
  • Opening daylight 400 mm (15.7’’)
  • Press platens with high resistance material covered with galvanized steel sheets.


  • Maximum thrust 50 ton
  • Thrust cylinders: 4
  • Thrust piston diameter 70 mm  (2.75’’)
  • Cylinder stroke 400 mm (15.7’’)
  • Press cylinders made of special seamless tubes of thick steel.
  • Welding done by a robot machine to control all welding parameters.
  • CNC machining allows minimum tolerance for precision movement and long life of the seals.
  • Pistons are machined out of a steel rod, CNC ground, polished and thickness chromed.



  • Compact hydraulic power unit made in Germany (make: HAWE)
  • Dual pump for high flow-low pressure and low flow-high pressure steps
  • Automatic re-set of hydraulic pressure
  • 1 kW Hydraulic power
  • Up-stroking movement of bottom platen



  • Welded beams press frame, calculated with high structural safety factor
  • Frame, moving platen and fixed platen machined on CNC heavy milling machine.
  • The moving platen is a fabricated weldment of high thickness steel beams to withstand the pressing tonnage with minimal deflection.
  • Self-lubricating guides diagonally placed, for flatness control
  • Rack and pinion system assures constant parallelism of the moving platen during closing and opening



  • Key on/off switch
  • Light-up pushbutton for emergency resetting (Run)
  • “TS 400” Computerized interface to control all press functions:
  • 3” colour “TOUCH-SCREEN” monitor for setting, storing, and monitoring all cycle parameters
  • Timer for pressing cycle
  • Digital temperature control
  • Digital pressure control with automatic control of the laminating pressure according to operator entered panel dimensions
  • Graphic display of suggested positioning of panels into the press
  • Automatic pressure commutation for the panel dimensions
  • Fault diagnostic system
  • Memory for 200 working program


  • Two-hand timed press closure push-button switches
  • Perimeter e-stop safety cable and switch
  • Mechanical platen lock to prevent movement.
  • Metal protective covers for potentially dangerous areas
  • Adhesive stickers to advise of precautions and danger
  • Maintenance and User’s manual